is it possible to use the hololens 2, robo dk and realvirtual.io, so that I can manipulate the robot in augmented reality using the glasses (using my hands to move the robot or use gestures)?

Hello,

I used to have the purple direction vector of a drive visible in the scene window when selecting a component with a drive, but now it disappeared. Do you know how I can get it back? 

Hello, we found some problem using the subscription method. Initially we used the polling method (not recommended), but eventually we found out that this starts failing when we try to capture values from different servers at the same time.

Here is the project attached with some debug lines added. We are using Integration Objects OPC UA server to test the subscription.

您的文档描述了 realvirtual 的 simulink 接口，但我找不到相关块，并且电子邮件显示无法发送，我如何获取应用程序？谢谢！

Hi,

after updating to the latest Realvirtual.io version, I get the following errors in my project:

UpdateProblem.JPG

Can you help fixing them?

EDIT: I already fixed it (deleted old "recorder.cs")!

Dear all,

I experienced a problem when connecting with Kepserverex OPCUA server through OPCUA_Interface in windows 11.

When I specify the IP address in the OPCUA_Interface, the following error appears:

Looks like the problem is in line 133 of the OPCUA_Interface script: 

IPAddress ipAddress = Dns.GetHostEntry (ServerIP).AddressList[0];

If I remove this instruction, then the communication seems to be established.

This issue doesn't happen when running the same version of Keperverex and Project Unity in Windows 10.

Have any one experienced this issue?

Thank you in advance!

Hello Thomas, 

I would like to set up a connection from Unity to Simit via the "Siemens Simit (PRO)" interface. I downloaded the files from Siemens and installed according to the documentation. Then I tried to connect the whole thing to the realvirtual.io interface. The connection was also successful. According to the realvirtual.io documentation, the signals to be exchanged should be attached to the interface as "children". Now to the problem: Simit does not get the signals from Unity i have attached. Could you see where the Problem is?

Thanks a lot for your help

Hello,

When i'm making a prefab using an imported STEP using the cadlink tool the meshes disappear. Did I forget a setting and how to fix this? I had the "Set and Create Materials" enabled.

When the number of parameters managed by the OPCUA server is increased (from 30 to 120),

The values are being sent in bits and pieces.

Does the frequency of communication decrease in proportion to the number of parameters?

Dear